Filter
Top Products
Installing Protocols
A-9
Macintosh (with Open Transport)
Follow the steps below to set or check the IP address.
1. Double-click the
AppleTalk
Control Panel, and check that
Ethernet
is selected.
2. Double-click the
TCP/IP
Control Panel.
3. Set the IP address and other necessary settings.
Macintosh (without Open Transport)
Follow the steps below to set or check the IP address.
1. Double-click the
Network
Control Panel, and select
EtherTalk
.
2. Double-click the
MacTCP
Control Panel, and check whether
an IP address has been set.
3. If the IP address has not been set, click the
Details
button and
make the necessary settings. Then, set the IP address in the
MacTCP dialog box.