Epson C82378 Printer User Manual


 
Settings for Macintosh
7-8
Entity type:
EPSONLQ2
must be displayed. To do this, click the
Entity
configuration
button and enter
EPSONLQ2
.
Entity configuration button:
Click this button and enter
EPSONLQ2
.
Network number set:
Select either
Auto
or
Manual
.
Auto
is usually preferred.
Network number for manual mode:
Type a value between 0 and 65534 when
Manual
is selected
for the Network number setting.
5. After making the settings, click
OK
. The Password dialog box
appears.
6. Enter your password (up to 20 characters) and click
OK
to
save settings. If you are entering a password for the first time,
click
Change
and set the password. For more information
about passwords, see “About passwords” on page 10-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting
Refresh
from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
network adapter, you must wait until the on-screen message
appears before turning off your printer.