Epson C82378 Printer User Manual


 
Settings for Windows 98/95
5-2
Printing with NetBEUI
This section explains how to configure the network adapter for
NetBEUI using EpsonNet WinAssist or WebAssist.
Note:
Be sure that the NetBEUI protocol and Client for Microsoft Networks
are installed in your computer. See “Installing the NetBEUI Protocol”
on page A-10 for instructions.
Configuring for NetBEUI using EpsonNet WinAssist
You can use the network adapter with the default setting for
NetBEUI. If you want to change the default setting, use EpsonNet
WinAssist or WebAssist. The default values for NetBEUI are as
follows;
To configure the network adapter for NetBEUI, follow the steps
below.
Note:
TCP/IP or IPX must be installed on your computer.
Before following the steps below, you must have set the IP address
for the network adapter or logged in to the NetWare server’s NDS
context as an ADMIN.
1. Turn on the printer with the network adapter.
2. Run EpsonNet WinAssist from the Start menu.
Items Default values
NetBIOS name EPxxxxxx
Workgroup name WORKGROUP
Device name EPSON