Filter
Top Products
Settings for Macintosh
7-5
Configuring for AppleTalk Using EpsonNet WinAssist
If you want to configure the network adapter using EpsonNet
WinAssist from a Windows environment, follow the steps below.
Note:
Before following the steps below, you must have set the IP address for
the network adapter or logged in to the NetWare server’s NDS context
as ADMIN.
1. Turn on the printer with the network adapter.
2. Start EpsonNet WinAssist.
Windows 98/95/2000/NT 4.0:
Click
Start
, point to
Programs
,
EpsonNet WinAssist
, then click
EpsonNet WinAssist
.
Windows NT 3.51:
Double-click the
EpsonNet WinAssist
icon
in the EpsonNet WinAssist group.