Filter
Top Products
Settings for NetWare
4-11
Using NDS Print Server (NetWare 4.1x/5)
This section contains instructions for using the network adapter
in Print Server mode under NetWare 4.1x, IntranetWare, or
NetWare 5 with NDS mode.
Configuring for NetWare using EpsonNet WinAssist
Configure the network adapter using EpsonNet WinAssist.
Note:
Be sure that the one of the following Clients is installed in your computer;
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on the printer with the network adapter.
2. From any NetWare client, log in to the target context of the
NDS tree as ADMIN.
3. Run EpsonNet WinAssist from the Start menu.
4. Click
IPX
. Select the printer you want to configure from the
list, then click
Configuration
.