Filter
Top Products
Getting Started
1-6
Initializing the Network Adapter
You must initialize the network adapter in the following cases:
❏
The first time you turn on the printer after installing the
network adapter
❏
When the utility does not recognize the network adapter
because of settings conflicts in the network adapter
❏
If you forget the configuration utility’s password
Follow these steps to initialize the network adapter.
1. Make sure that the printer with the network adapter is turned
off.
2. While holding down the status sheet button, turn the printer
on.
3. Hold down the status sheet button for about twenty seconds
until the red Status light and green Data light turn on. These
lights indicate that the network adapter is being initialized.
4. After initialization is complete, press the status sheet button
to print a status sheet. Check the information on the status
sheet.