Filter
Top Products
Getting Started
1-5
4. Plug the AC adapter into the network adapter’s DC-IN
connector. Be sure to use the AC adapter shipped with this
package.
w
Warning:
When you install or uninstall the network adapter, you must
turn off the printer and unplug the AC adapter from the wall
outlet to prevent electric shock.
5. Plug the power cord into a properly grounded wall outlet.
6. Turn on the printer.
7. The first time you use the network adapter after installing or
reinstalling it, turn on the printer while holding down the
status sheet button for twenty seconds to initialize the
network adapter.
Note:
After installing the network adapter, some printers take more than
30 seconds to initialize the network adapter.
8. Press and hold down the status sheet button to print a status
sheet.
If a status sheet prints, the network adapter has been installed
correctly.
c
Caution:
After turning off the printer, wait until the status lights go
out before turning it back on or before removing the network
adapter from the printer; otherwise the network adapter may
not work correctly.