Epson C82378 Printer User Manual


 
Setting the IP Address
3-1
Chapter 3
Setting the IP Address
To use the network adapter with TCP/IP, you need to assign it
an IP address using EpsonNet WinAssist, EpsonNet MacAssist,
or the arp/ping command.
The IP address should be set in the following cases:
When configuring the network adapter using EpsonNet
WebAssist (the utility that is pre-installed in the network
adapter)
When remote (LPR on IP) printing from NetWare 5
When TCP/IP (via EpsonNet Direct Print) printing from
Windows 98/95/2000/NT 4.0
When TCP/IP (LPR port) printing from Windows 2000/NT
4.0/NT 3.51
When TCP/IP (lpr port) printing from OS/2 Warp or UNIX
When Internet Printing using EpsonNet Internet Print from
Windows 98/95/NT 4.0
When Internet Printing from Windows 2000
When managing printers using EpsonNet WebManager via
TCP/IP