Filter
Top Products
Settings for NetWare
4-45
❏
Select
Standby
when not using NetWare, or when
problems arise from setting NetWare to Enable.
7. When using NDS mode, enter the NDS Tree name (up to 31
characters) and the NDS Context without "." at the top (up to
255 characters). Leave these items blank if using Remote
Printer mode.
8. When you select
NDS Print Server
or
Bindery Print Server
for
the Mode, make the Print Server settings.
Primary File Server Name:
Set the file server which the print server logs in (up to 47
characters) if the mode is Bindery Print Server.
Print Server Name:
Set the print server name (up to 47 characters).
Polling Interval:
Set the polling time from 5 to 90 seconds. Usually this value
does not need to be changed.
NetWare Password:
Set a password up to 20 characters to be used when the
network adapter logs in to the print server. Usually this value
does not need to be changed.
9. When you select
Remote Printer
for the Mode, make the
Remote Printer settings.
Primary Print Server Name:
Set the print server name (up to 47 characters).
Printer Port Number:
Set the same port number you assigned to the print server.
10. Click
SUBMIT
and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See “Password” on page 10-30 for
more information on setting the password.