Filter
Top Products
EPSON Status Monitor 2 (Windows only)
12-6
NetWare printer
You can use the network printer though the NetWare server.
Make sure the following points;
❏
Connect the printer to a Bindery queue or NDS queue in
Windows 98/95/2000/NT 4.0/NT 3.51.
❏
Use IntranetWare Client32 Ver1.12 or later for Windows 95.
Use IntranetWare Client for Windows NT. Use the latest
Novell Client for Windows 98.
❏
See the EPSON Status Monitor 2 README file for more
information about NDS support.
❏
Set the port number to 0 when using Remote Printer mode.
❏
For an explanation of NetWare printer protocols, see your
NetWare documentation.
If you use your printer in a NetWare environment, you need to
connect to the print queue that is assigned to your printer before
installing EPSON Status Monitor 2.
1. Click
Start
, point to
Settings
, and click
Printers
.
2. Click
Add Printer
.
3. Select
Network printer
, and click
Next
.
4. Double-click the NetWare file server that services the print
queue assigned to your printer.
5. All of the queues serviced by that file server appear in a list.
Select the correct print queue, and click
OK
. (If the printer
driver is not installed, a dialog box appears prompting you to
select the printer driver.)
6. Make the default printer setting and click
Next
.
7. Click
Finish
.