Filter
Top Products
Settings for Windows 2000/NT
6-22
4. Click
SUBMIT
and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See “Password” on page 10-30 for
information on setting the password.
5. If the message “Configuration change is complete!” appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Then, follow the on-screen instructions to reset the
printer.
Setting up your printer
1. Click
Start
, point to
Settings
, and then click
Printers
.
2. Double-click
Add Printer
to start the Add Printer wizard, and
then click
Next
.
3. Click the
Network printer
radio button and click
Next
.
4. Select the
Connect to a printer on the Internet or on your
intranet
radio button.
5. Enter the URL of the target printer using the format below.
The URL should be same as the URL you set in the EpsonNet
WebAssist’s IPP configuration page.
http:
//
the IP address of the printer
:
631
/
the printer name
Example:
http://192.168.100.201:631/EPSON_IPP_Printer
6. Follow the on-screen instructions to install the printer driver.