Filter
Top Products
EPSON Status Monitor 2 (Windows only)
12-2
Environment for EPSON Status Monitor 2
Protocols
The protocols that must be installed to run EPSON Status
Monitor 2 vary depending on your operating system and printer
type. The following table divides printers into four categories:
Local printers; LPR printers, which use TCP/IP (generally in a
Windows NT network environment); NetWare printers, which
use Novell’s IPX/SPX protocol in a NetWare environment; and
Windows shared printers. Use this table to determine what
protocols you need to install according to your operating system
and printer type, then see the corresponding section for your
operating system.
EPSON LPR
1
= EpsonNet Direct Print
LPR
2
= Windows NT LPR protocol
NetWare
3
= Necessary protocols already installed
Local
Printer
LPR Printer
(TCP/IP)
NetWare
Printer
(IPX/SPX)
Windows
Shared
Printers
Windows 98
LPT EPSON LPR
1
NetWare
3
LPT
Windows 95
LPT EPSON LPR
1
NetWare
3
LPT
Windows 2000
Windows NT4.0
LPT TCP/IP &
LPR
2
NetWare
3
LPR
2
& LPT
Windows NT
3.51
Not
available
TCP/IP &
LPR
2
NetWare
3
LPR
2
& LPT