Filter
Top Products
Setting the IP Address
3-9
Changing the IP Address Using EpsonNet WebAssist
After you have configured the network adapter for TCP/IP using
EpsonNet WinAssist, MacAssist, or the arp/ping commands, you
can make changes to the IP address or other settings using
EpsonNet WebAssist (a utility that runs on your browser).
Note:
❏
A web browser must be installed in your computer.
❏
TCP/IP must be correctly set for the computer and network adapter.
❏
Do not operate EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist for the printer at the same time.
❏
There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS
documentation.
Follow the steps below to change the IP address using EpsonNet
WebAssist.
1. Turn on the printer with the network adapter.
2. Run EpsonNet WebAssist by either way described below.
❏
Run EpsonNet WinAssist or EpsonNet MacAssist. Click
the printer you want to configure from the list and click
Launch Browser
.
❏
Open your browser, and type in the IP address of the
network adapter directly. Do not run EpsonNet
WinAssist or MacAssist.
http:
//
the IP address of the network adapter
/
Example:
http://192.168.100.201/