Filter
Top Products
Settings for Windows 2000/NT
6-2
Printing with TCP/IP
This section explains how to set up the printer for use in a TCP/
IP environment.
Note:
❏
If you have not set the IP address for the network adapter, see
“Setting the IP Address Using EpsonNet WinAssist/MacAssist”
on page 3-2 for instructions.
❏
Be sure that the TCP/IP protocol is installed in your computer. See
“Installing TCP/IP Protocols on Your PC” on page A-1 for
instructions.
Printing via Standard TCP/IP Port Monitor in Windows 2000
When using the printer on a TCP/IP network in Windows 2000,
follow the steps below to connect the network printer to your
computer using Standard TCP/IP Port Monitor.
Setting up your printer
1. Make sure the printer is turned on.
2. Click
Start
, point to
Settings
, and then click
Printers
.
3. Double-click
Add Printer
to start the Add Printer wizard, and
then click
Next
.
4. Click
Local printer
, clear the
Automatically detect my
printer
check box, and then click
Next
.