Filter
Top Products
Settings for NetWare
4-39
Configuring for NetWare using EpsonNet WinAssist
Follow the steps below if the printer is a Remote (rprinter on IPX)
connection.
Note:
❏
The following configuration is not necessary if the printer is a
Remote (LPR on IP) connection or Forward jobs to a Queue
connection.
❏
Be sure that the one of the following Clients is installed in your
computer; Novell Client 32, Novell IntranetWare Client, or Novell
Client.
1. Turn on the printer with the network adapter.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet WinAssist from the Start menu.
4. Click
IPX
. Select the printer you want to configure from the
list, then click
Configuration
.
Note:
❏
If you have connected more than one printer to the network, you
can distinguish between the printers by the MAC address on
the status sheet.