Filter
Top Products
EPSON Stylus Scan 2500 Revision A
Product Description Control Panel 23
1.6 Control Panel
Figure 1-8. Control Panel
1.6.1 Buttons
* The user’s guide states three seconds.
S
Error
indicator
Operate
indicator
Stop/Clear
button
Copy
button
Copies
Quality
button
Hold for
menu
Return
Item
B&W/Color
button
Reduce/
Enlarge
Darker/
Lighter
Printout Size
button
Scan
button
Load/
Eject
Cleaner
LCD Panel
Table 1-9. Button functions
Button Function
Load/Eject
(pushed within
two* seconds)
• Loads or ejects paper
• If the carriage is at the ink cartridge installation position,
returns the carriage back to the home position.
Load/Eject
(pushed for two*
seconds)
• Starts the ink cartridge replacement sequence (not
available during printing.
Shifts the carriage to the ink cartridge replacement
position.
Cleaning
(pushed for two*
seconds)
• Starts the printhead cleaning cycle.
• If the printer is in the “Ink Low” or “Ink Out” or “No Ink
Cartridge” condition, starts the ink cartridge replacement
sequence.
Cleaning
(pushed within
two* seconds)
• If the carriage is at the ink cartridge replacement position,
returns the carriage from the ink cartridge replacement
position to the home position.
Table 1-10. Power-on functions
Button Function
Load/Eject
Prints a status sheet that includes firmware version, ink
counter, and nozzle check patterns.
Load/Eject
+
Cleaning
Enters the special-settings mode (see table below), which
remains active for three seconds. If neither the Load/Eject
nor Cleaning button is pushed in that three seconds, normal
initialization begins.
Table 1-11. Special settings mode
Button Function
Load/Eject Resets the real-time counter (power-off time) in EEPROM
Cleaning
(hold for ten
seconds)
Resets the waste ink overflow counter