Filter
Top Products
CONFIDENTIAL
Paper roll Character commands GS !
Ver. 10.01 p. 150
GS !
SETTING COMMAND
[Name] Select character size
[Format] ASCII GS !
n
Hex 1D 21
n
Decimal 29 33
n
[Range] 0 ≤
n
≤ 7, 16 ≤
n
≤ 23, 32 ≤
n
≤ 39, 48 ≤
n
≤ 55,
64 ≤
n
≤ 71, 80 ≤
n
≤ 87, 96 ≤
n
≤ 103, 112 ≤
n
≤ 119
(1 ≤ height ≤ 8, 1 ≤ width ≤ 8)
[Default]
n
= 0
[Printers not featuring this command] TM-U220, TM-U230, TM-U210, TM-U300A/B
[Description] Selects the character height (vertical number of times normal font size) using bits 0 to 2 and selects the
character width (horizontal number of times normal font size) using bits 4 to 6, as follows:
Character width selection Character height selection
Bit 6 Bit 5 Bit 4 Hex Decimal Width Bit 2 Bit 1 Bit 0 Hex Decimal Height
Off Off Off 00 0 1 (normal) Off Off Off 00 0 1 (normal)
Off Off On 10 16 2 (double-
width)
Off Off On 01 1 2 (double-
height)
Off On Off 20 32 3 Off On Off 02 2 3
OffOnOn30 48 4 OffOnOn03 3 4
On Off Off 40 64 5 On Off Off 04 4 5
On Off On 50 80 6 On Off On 05 5 6
On On Off 60 96 7 On On Off 06 6 7
OnOnOn70 112 8 OnOnOn07 7 8
Character commands