Epson TM-U210 Printer User Manual


 
CONFIDENTIAL
Paper roll Print commands FF (on label)
Ver. 10.01 p. 76
FF (on label)
EXECUTING COMMAND
[Name] Print and feed label to print starting position (on label)
[Format] ASCII FF
Hex 0C
Decimal 12
[Default] None
[Range] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Description] Prints the data in the print buffer and feeds paper to the print starting position on the next label.
[Recommended Functions]
This command is an obsolete command that is supported only by some printer models and may not be
supported by future models.
FS ( L is recommended for controlling labels. With the following procedure, that command can perform the
same as this command.
1. Using LF, the printer prints the last line of a label.
2. Using FS ( L <Function 67, (m = 49)>, execute the paper feed to the print start position of the next
label.
[Notes]
This command is enabled only when a label is selected in standard mode. Printer operation differs when
page mode is selected.
After printing, the print position moves to the beginning of the line. When a left margin is set, the
position of the left margin is the beginning of the line.
Method of specifying label paper differs, depending on the printer models.
Print commands
obsolete command
obsolete command