Filter
Top Products
CONFIDENTIAL
Paper roll Kanji commands FS !
Ver. 10.01 p. 488
[Notes]
■ Settings of this command affect multilingual characters (except Thai) and user-defined characters.
■ Settings of this command are effective until any of the following commands are executed, ESC @ is
executed, the printer is rest, or the power is turned off.
• Character size (bits 2 and 3): FS W, GS !
• Underline (bit 7): FS –
■ When a double-height mode is specified, a character is enlarged based on a baseline of the character.
■ When a double-width mode is specified, a character is enlarged based on the left side of the character.
■ When both double-width and double-height modes are specified, quadruple-size characters are printed.
■ When double-height mode is selected in standard mode, a character is enlarged in the paper feed
direction and when double-width mode is selected, a character is enlarged in the direction which is
perpendicular to the paper feed direction. Therefore, when 90° clockwise-rotation is selected, the
relationship between directions of enlargement of double-height and double-width is opposite from
normal direction.
■ When double-height mode is selected in page mode, height size is enlarged and when double-width mode
is selected in page mode, width size is enlarged.
■ When Kanji underline mode is specified, the width of the underline set by FS – is added. Even if the
character size is changed, the width is not changed.
■ Even if Kanji underline mode is specified, 90° clockwise-rotated characters, white/black reverse characters,
and spaces skipped by HT, ESC $, or ESC \ are not underlined.