Epson TM-U210 Printer User Manual


 
CONFIDENTIAL
Paper roll Customize commands GS ( C
Ver. 10.01 p. 561
GS ( C pL pH m fn b c1 c2 d1...dk <Function 1>
[Name] Store the data in the specified record
[Format] ASCII GS ( C
pL pH m fn b c1 c2 d1...dk
Hex 1D 28 43
pL pH 00 fn 00 c1 c2 d1...dk
Decimal 294067
pL pH 0 fn 0 c1 c2 d1...dk
[Range] 6 (
pL
+
pH
× 256) 65535 (0
pL
255, 0
pH
255)
m
= 0
fn
= 1, 49
b
= 0
32
c1
126
32
c2
126
32
d
254
k
= (
pL
+
pH
× 256)5
[Description] Stores the data (
d1... dk
) as the record specified by the key codes (
c1
,
c2
) in the NV user memory.
When the specified record already exists, the data is overwritten.
A terminator is automatically assigned.
[Notes]
In standard mode, this command is valid only at the beginning of the line.
You cannot include macros with this command, so do not use this command while defining macros.
You cannot use this command when the NV user memory does not have enough capacity to store the
specified records. The available capacity is confirmed by Function 4.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-L90, TM-P60, TM-U220
TM-J2000/J2100
This function uses the “data quantity (
k
) + number of control information data (3 byte)” area for
execution.
TM-T90
This function uses the “data quantity (
k
) + number of control information data (3 byte)” area for
execution.