Epson TM-U210 Printer User Manual


 
CONFIDENTIAL
Paper roll Counter printing commands GS c
Ver. 10.01 p. 643
GS c
EXECUTING COMMAND
[Name] Print counter
[Format] ASCII GS c
Hex 1D 63
Decimal 29 99
[Range] None
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-P60, TM-U230, TM-U220, TM-U210,
TM-U300A/B
[Description] Stores the serial number counter value in the print buffer and counts up or down the serial number counter
value.
[Recommended Functions]
This command is supported by some printer models and will not be supported by future models.
Future models will not support counter value.
[Notes]
If the counter value is smaller than minimum value or bigger than maximum value when executing this
command, counter value is changed based on the count mode set before stored in the print buffer.
After setting the current counter value in the print buffer as print data (a character string), the printer
updates counter value based on the count mode set.
In count-up mode, the counter value is updated as [counter value + increase and decrease value].
In count-down mode, the counter value is updated as [counter value – increase and decrease value].
In count-stop mode, the counter value is not updated.
The counter value in the print buffer is printed when the printer receives a print command or is in the
buffer-full state.
In count-up mode, if the counter value is the maximum of the specified counter value, it is forced to
convert to the minimum value by this command.
In count-down mode, if the counter value is the minimum of the specified counter value, it is forced to
convert to the maximum value by this command.
Counter printing commands
obsolete command
obsolete command