Filter
Top Products
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 582
The setting of [Msw8-2] affects the recovery operation from the paper layout error. Memory switch [Msw8-2]
is supported differently, depending on the firmware version.
• Setting of [Msw 8-3] is supported differently, depending on the firmware verstion.
• Setting of [Msw 8-5] affects the performance as follows:
■ Executing “Automatic paper layout setting mode function (m = 64)” of GS ( A
■ Executing “Automatic paper layout setting mode function” by panel operation
■ Executing “Automatic Paper Recognition Function.” (The function is automatically executed
when the printer has no setting of paper layout setting. )
• Setting of [Msw 8-5] affects the performing of command GS k.
8-5 48 Spacing of both sides for bar code: not inserted
49 Spacing of both sides for bar code: inserts a space
8-6 48 Perform paper feed to the print starting position when power is turned on
49 Not perform paper feed to the print starting position when power is turned on
8-7 50 Reserved
8-8 48 Roll paper cover open during printing: automatic recoverable error
49 Roll paper cover open during printing: recoverable error
[Msw8-2] Recovery operation from error
OFF Can recover from the error by opening/closing the printer
cover in addition to by executing DLE ENQ. While the
printer recovers from the error, paper layout is measured
automatically and paper is fed to the label print starting
position and the paper layout stored in the non-volatile
memory is rewritten.
ON Can recoer by executing DLE ENQ. While the printer
recovers from the error, paper is fed to the label print
starting position. Change the setting of the paper layout
stored in the non-volatile memory so that it matches the
currently used papyer layout. See function 49 of this
command for setting the paper layout.