Filter
Top Products
CONFIDENTIAL
Paper roll Print commands ESC J
Ver. 10.01 p. 84
TM-L90
The vertical or horizontal motion unit is specified by GS P.
In standard mode, if the character height is greater than the specified paper feed amount, the
paper is fed the amount of the character height. For example, if a paper feed of 30 dots is
specified with ESC J, but the character height is 48 dots, the paper is fed 48 dots.
When the origin of layout is selected to bottom of label or top of black mark in standard mode
and a paper feed amount that exceeds the remaining printable area of the label is sent, the
printer executes one of the following:
■ If the printer will print a line that is higher than the remaining printable area of the label, the printer feeds
the label to the next print starting position and the printer executes this command.
■ If the printer will print in the remaining printable area of the label, but a feed amount that exceeds the
remaining printable area of the labels is sent, the printer prints on the label and feeds to bottom of the
label.
The amount of paper feed of the Japanese Kanji model can be up to 900 mm {35.4 inches}. When
the amount of paper feed exceeding the maximum is specified, the maximum paper feed is
executed.
TM-L60II
The vertical or horizontal motion unit is specified by GS P.
In standard mode, if the character height is greater than the specified paper feed amount, the
paper is fed the amount of the character height. For example, if a paper feed of 30 dots is
specified with ESC J, but the character height is 48 dots, the paper is fed 48 dots.
When label paper is selected in standard mode and a paper feed amount that exceeds the length
of one label is sent, the printer feeds the label to the next print starting position.