Filter
Top Products
CONFIDENTIAL
Paper roll Kanji commands FS 2
Ver. 10.01 p. 499
FS 2
SETTING COMMAND
[Name] Define user-defined Kanji characters
[Format] ASCII FS 2
c1 c2 d1...dk
Hex 1C 32
c1
c2 d1...dk
Decimal 28 50
c1
c2 d1...dk
[Printers not featuring this command] TM-L60II, TM-P60
[Range] The ranges of
c1
and
c2
differ, depending on models and the character code system used. The ranges of
c1
and
c2
for each model are as follows.
0 ≤
d
≤ 255
TM-J2000/J2100, TM-T90, TM-L90:
k
= 72 [Simplified Chinese model / Traditional Chinese model / Korean model]
k
= 72 [Japanese model: Kanji Font A (24 × 24)
k
= 60 [Japanese model: Kanji Font B (20 × 24)
k
= 32 [Japanese model: Kanji Font C (16 × 16)
TM-T88III:
k
= 72
TM-U230, TM-U220, TM-U210, TM-U300A/B:
k
= 32
[Description] Defines the user-defined Kanji character pattern specified by the character codes (
c1
and
c2
) of the currently
selected Kanji font.
•
c1
specifies the first byte of a character code for a user-defined Kanji character.
Models
c1
c2
Japanese model (JIS code)
c1
= 77H 21H ≤
c2
≤ 7EH
Japanese model (SHIFT JIS code)
c1
= ECH 40H ≤
c2
≤ 7EH,
80H ≤
c2
≤ 9EH
Simplified Chinese
c1
= FEH A1H ≤
c2
≤ FEH
Traditional Chinese
c1
= FEH A1H ≤
c2
≤ FEH
Korean
c1
= FEH A1H ≤
c2
≤ FEH
Kanji commands