Filter
Top Products
CONFIDENTIAL
Paper roll Miscellaneous commands GS ( K
Ver. 10.01 p. 440
GS ( K
SETTING COMMAND
[Name] Select print control method(s)
[Printers not featuring this command] TM-T88III, TM-L60II, TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Selects the print control methods.
• Function code
fn
specifies the function.
•
pL
,
pH
specifies (
pL
+
pH
× 256) as the number of bytes after
pH
(
fn
and
[parameters]
).
The
[parameters]
are described in each function.
[Notes]
■ This command decides the function according to the function code (
fn
). Performance of the functions
differs, depending on the function.
■ The settings of this command are effective until ESC @ is executed, the printer is reset, or the power is
turned off.
[Model-dependent variations] TM-J2000/J2100, TM-P60
TM-J2000/J2100
This printer does not support Function 49, 50, and 97.
TM-P60
This printer does not support Function 49, 50, and 97.
fn
Function No. Function name
48 Function 48 Select the print control mode
49 Function 49 Select the print density
50 Function 50 Select the print speed
97 Function 97 Select the number of parts for the thermal head energizing
Program Example
PRINT #1, CHR$(&H1D);”(K”;CHR$(2);CHR$(0);CHR$(048);CHR$(049); ← Function 48
Miscellaneous commands