Filter
Top Products
CONFIDENTIAL
Paper roll Bit-image commands GS /
Ver. 10.01 p. 285
TM-J2000/J2100
This printer supports the graphics functions of GS(L/GS8 L. It is recommended to use
GS(L /GS8 L instead of GS /.
Values of [Dot Density] and [Maximum Print Area (dot)] are the same as in the graphics function
GS(L/GS8L of Function 69.
TM-T90
The dot density and the maximum print area are described in the next tables (dpi: number of dots per 25.4
mm).
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles) to the
direction of paper feeding.
The maximum print area in the vertical direction is information used when graphics are printed with the page
mode selected (for the starting position specified with ESC T is “Upper right” or “Lower left”). In this case,
bit images rotated by 90 degrees or 270 degrees are printed.
See Function 5 of GS ( E for the paper width.
<Other than Japanese model>
<Japanese model>
Scaling
Vertical Horizontal
Dot density
Maximum print area (dot)
Dot density Maximum print area (dot)
Paper width
80 mm
Paper width
60 mm
Paper width
58 mm
× 1 180 dpi 512 384 360 180 dpi 831
×
2 90dpi 256 192 180 90 dpi 415
Scaling
Vertical Horizontal
Dot density
Maximum print area (dot)
Dot density Maximum print area (dot)Paper width 80 mm Paper width 60 / 58 mm
×
1 203 dpi 576 420 203 dpi 738
×
2 203/2 dpi 288 210 203/2 dpi 369