Filter
Top Products
CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 249
<Japanese model>
TM-L90
The dot density and the maximum print area are described in the next tables (dpi: number of dots per 25.4
mm).
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles) to the
direction of paper feeding.
The maximum print area in the vertical direction is information used when graphics are printed with the page
mode selected (for the starting position specified with ESC T is “Upper right” or “Lower left”). In this case,
graphics rotated by 90 degrees or 270 degrees are printed.
See Function 5 of GS ( E for the paper width.
See Function 49 of GS ( E for the origin of layout (paper layout is not used / top of black mark / bottom of
label).
(*1) The maximum print area in the horizontal direction is defined by the paper width.
Scaling
Vertical Horizontal
Dot density
Maximum print area (dot)
Dot density Maximum print area (dot)Paper width 80 mm Paper width 60 / 58 mm
×
1 203 dpi 576 420 203 dpi 738
×
2 203/2 dpi 288 210 203/2 dpi 369
Horizontal Vertical
Maximum print area (dot)(*1)
Maximum print
area (dot)Scaling Dot density
When paper layout is not used
or top of black mark is selected
When the bottom
of label is selected Dot density
× 1 203 dpi 256 to 576 224 to 560 203 dpi 738
× 2 203/2 dpi 128 to 288 112 to 280 203/2 dpi 369