Filter
Top Products
CONFIDENTIAL
Paper roll Kanji commands FS &
Ver. 10.01 p. 490
FS &
SETTING COMMAND
[Name] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Printers not featuring this command] TM-L60II, TM-P60
[Description] Selects Kanji character mode.
[Notes]
■ This command can be used only for the Japanese, Simplified Chinese, Traditional Chinese, and Korean
models.
■ Kanji codes are processed in order of the first byte and the second byte.
■ Settings of this command are effective until FS . is executed, ESC @ is executed, the printer is reset, or the
power is turned off.
■ Notes for Japanese model:
• Settings of this command affect processing of a character code only when JIS code system is selected by
FS C.
• If Kanji mode is specified when JIS code system is selected, the printer processes a character code as a
2-byte code.
• Kanji mode is canceled at default.
■ Notes for Simplified Chinese model:
• When Kanji mode is selected, the printer processes a character code that corresponds to the first byte
of Kanji code, and then processes consecutive byte(s) as the second byte ( ~ the fourth byte) of Kanji
code. Therefore, when Kanji code is specified, an ASCII code character that corresponds to the first byte
of Kanji code cannot be printed.
• Kanji mode is selected at default.
Kanji commands