Filter
Top Products
CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.01 p. 654
TM-L90
The following operation is executed according to a set value of the paper layout.
*Set the paper layout (
sb
,
se
) by the Function 49 of GS ( E.
Set value of paper layout Operation
Paper layout (
sb
–
se
) is less than 24 mm {0.94 inch} or
Paper layout (
sb
–
se
) is more than or 29 mm {1.1 inches}
Execute the paper feed to the manual cutter
position by “Cutting position” (
se
) specified by the
paper layout.
Paper layout (
b
–
e
) is between 24 mm {0.94 inch} and
29 mm {1.1 inches}
Execute the paper feed by the amount which
corresponds to paper layout (
sb
–
se
).