Filter
Top Products
CONFIDENTIAL
Paper roll Bar code commands GS w
Ver. 10.01 p. 355
GS w
SETTING COMMAND
[Name] Set bar code width
[Format] ASCII GS w
n
Hex 1D 77
n
Decimal 29 119
n
[Range] TM-J2000/J2100: 2 ≤
n
≤ 6, 68 ≤
n
≤ 76
TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60: 2 ≤
n
≤ 6
[Default] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60:
n
= 3
[Printers not featuring this command] TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Sets the horizontal size of a bar code.
•
n
specifies the bar code module width.
[Notes]
■ The units for
n
depend on the printer model.
■ This command setting is effective until performing of ESC @, reset or power-off.
■ Bar code types are Multi level bar code (UPC-A, UPC-E, JAN13(EAN13), JAN8(EAN8), CODE93, and
CODE128) and Binary level bar code (CODE39, ITF, CODABAR(NW7).
Bar code commands