Filter
Top Products
CONFIDENTIAL
Paper roll Bit-image commands ESC *
Ver. 10.01 p. 198
TM-J2000 (single-color printing model)
The modes selectable by
m
are as follows:
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles)
to the direction of paper feeding.
See Function 5 of GS E for specifying the paper.
When both standard mode and page mode are selected (a starting position specified by ESC T is
upper left or lower right).
When the starting position specified by ESC T is upper right or lower left in page mode.
90° or 270° rotated bit-image data will be printed.
dpi: dots per 25.4 mm (dots per inch)
m
Mode
Vertical
dot
density
Horizontal
Dot
density
Set
adjacent
dots
Maximum number of dots
Paper width
82.5 mm
Paper width
76 mm
Paper width
69.5 mm
Paper width
57.5 mm
0 8-dot single-density 60 dpi 90 dpi Permitted 256 240 216 180
1 8-dot double-density 60 dpi 180 dpi Permitted 512 480 432 360
32 24-dot single-density 180 dpi 90 dpi Permitted 256 240 216 180
33 24-dot double-density 180 dpi 180 dpi Permitted 512 480 432 360
m
Mode
Vertical
Horizontal
dot
density
Dot
density
Set
adjacent
dots
Maximum number of dots
Paper width
82.5 mm
Paper width
76 mm
Paper width
69.5 mm
Paper width
57.5 mm
0 8-dot single-density 90 dpi Permitted 416 444 492 592 60 dpi
1 8-dot double-density 180 dpi Permitted 832 888 984 1184 60 dpi
32 24-dot single-density 90 dpi Permitted 416 444 492 592 180 dpi
33 24-dot double-density 180 dpi Permitted 832 888 984 1184 180 dpi