Filter
Top Products
CONFIDENTIAL
Paper roll Bit-image commands GS
✻
Ver. 10.01 p. 280
•
k
indicates the number of the definition data.
k
is an explanation parameter; therefore, it does not
need to be transmitted.
[Recommended Functions]
This command is supported only by some printer models and may not be supported by future models.
It is recommended that downloaded graphics function (GS ( L GS 8 L: <Function 52 > and <Function 80 >
~ <Function 85>) be used because they offer the following additional features:
• Multiple number of logo data and mark data can be specified (except for some models).
• Data control by key code is possible.
• Redefining or deleting the same data is possible for each key code.
• Selecting a color for printing is possible.
• Defining data by raster format is possible.
• The remaining capacity of the definition area can be confirmed.
[Notes]
■ Data (
d
) specifies a bit printed to 1 and not printed to 0.
■ The downloaded bit image is not defined at the default.
■ Once a downloaded bit image has been defined, it is available until another definition is made, ESC @ is
executed, the printer is reset, or the power is turned off. On some models, when executing ESC &, the
downloaded bit image data is cleared.
■ On some models. a downloaded bit image and a user-defined character cannot be defined simultaneously.
• When this command is executed, the user-defined character is cleared.
• When ESC & is executed, the downloaded bit image data is cleared.
■ The downloaded bit image is printed by GS /.