Epson TM-U210 Printer User Manual


 
CONFIDENTIAL
Paper roll Miscellaneous commands GS P
Ver. 10.01 p. 471
In page mode, the following commands use
x
or
y
, when the starting position is set to the upper right or
lower left of the print area using ESC T.
Commands using
x
: ESC 3, ESC J, ESC K, ESC W, GS $, and GS \
Commands using
y
: ESC SP, ESC $, ESC W, ESC \, FS S, GS A and GS V
Setting of this command is effective until ESC @ is executed, the printer is reset, or the power is turned
off.
The calculated result from combining this command with others is truncated to the minimum value of the
mechanical pitch.
This command does not affect the current setting values.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88III, TM-L60II, TM-L90
TM-J2000/J2100
The default values equal the normal dot pitch horizontally and 1/2 dot pitch vertically.
TM-T90
The default values equal the normal dot pitch horizontally and 1/2 dot pitch vertically.
Program Example for all printers Print Sample
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180); AAAAA
PRINT #1, CHR$(&H1B);"3";CHR$(30);
Set line spacing BBBBB
PRINT #1, "AAAAA"; CHR$(&HA); CCCCC 30/180-inch line spacing
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(90); DDDDD
PRINT #1, CHR$(&H1B);"3";CHR$(30);
Set line spacing 30/90-inch line spacing
PRINT #1, "CCCCC"; CHR$(&HA); EEEEE
PRINT #1, "DDDDD"; CHR$(&HA);
PRINT #1, "EEEEE"; CHR$(&HA);