Epson TM-U210 Printer User Manual


 
CONFIDENTIAL
Paper roll Macro function commands GS ^
Ver. 10.01 p. 363
GS ^
EXECUTING COMMAND
[Name] Execute macro
[Format] ASCII GS ^
r t m
Hex 1D 5E
r t m
Decimal 29 94
r t m
[Range] 1
r
255
0
t
255
m
= 0, 1
[Default] None
[Printers not featuring this command] TM-P60, TM-U220, TM-U210, TM-U300A/B, TM-U230
[Description] Executes a macro
r
times while waiting
t
× 100 msec for each macro execution, using the mode specified by
m
as follows:
When
m
= 0, the macro executes
r
times continuously at the interval specified by
t
.
When
m
= 1, the printer waits for the period specified by
t
, blinks the LED, and then waits for the Paper
feed button to be pressed. After this button is pressed, the printer executes the macro once. The printer
repeats this operation
r
times.
[Notes]
If a macro is not defined or if
r
is 0, this command is ignored.
Even if the panel buttons are disabled by ESC C 5, paper feed button will be enabled temporarily while
printer is waiting for the buttons to be pressed when execution mode by button (
m
= 1) is specified.
However, paper can not be fed if the paper feed button is pressed.
If this command is processed while a macro is being defined, the printer cancels macro definition and
clears the definition.
This command can not be contained in the macro. Do not use this command when the macro is defined.
The LED and the Paper feed button are different, depending on the printer model.
The macro is defined by GS :.
Macro function commands