Filter
Top Products
107
Location Recorder Model PD606
Chapter 6: Advanced operations
1) While the unit is stopped, press the [SHIFT] key to light [SHIFT] indicator, followed by the
[ENTER/YES] key.
The display now shows the MENU list screen.
2) While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
3) Use the [MENU] dial to select the “Auto copy” menu item and press the [ENTER/YES] key.
The current setting flashes and you can now select the desired auto copy mode.
By default, “Off” flashes.
You can select from among “Off”, “BGRD” (Background) and “IMME” (Immediately).
Selecting auto copy mode
You can make setting of the auto copy mode via the "Auto copy" item in the "SYS SETUP"
menu of the MENU mode. The following procedure assumes that an unused DVD-RAM disk
is set to the DVD multi drive.
2) Use the [MENU] dial to select the desired partition and press the [ENTER/YES] key.
The display changes to show the Home screen for the selected partition.
The following shows the screen example when you select unused partition 2 (P02).
4) Use the [MENU] dial to select the desired option and press the [ENTER/YES] key.
After the display shows “Setup auto copy” followed by “Ready auto copy”, the selected
mode is set. In this procedure example, it is assumed that “IMME” is selected.
Flashing