Fostex PD606 Network Card User Manual


 
12
Location Recorder Model PD606
Introduction
Do not let water or other liquid, or metal objects such as pins,
accidentally enter the inside of the unit (especially inside of the disk
tray) because this may lead to electric shock or damage. Should
water enter the inside of the unit, turn off the power, unplug the AC
adaptor and remove batteries, and consult your dealer or the
nearest FOSTEX service station.
Do not drop the unit or give it a strong shock. Doing so may damage
the internal circuits, display or panels. Handle the unit with great
care because it is a precision mechanical device.
Do not open the case or touch inside the unit because of the danger
of electric shock and failure.
Do not give a strong shock to the LCD display. The liquid used inside
the LCD display is toxic. If the liquid is spilled, do not suck it in.
If it is stained to your hand or skin, wash immediately with plenty of
water.
Though the unit is designed to be used outside, it is not perfectly
waterproofed. So do not use the unit where it catches the rain or
spray directly.
<About replacing the lithium battery>
The unit contains the internal lithium battery for running the internal
clock. The battery should be replaced approximately every five years.
To replace the battery, ask your dealer or the nearest FOSTEX service
station. If the battery is not correctly replaced, there may be a risk of
explosion, etc.
<Important!>
The model name, power require-
ment and serial number for the PD-
606 are indicated on the bottom
side.
MODEL PD606
LOCATION RECORDER
FOSTEX CO.
INPUT: 12~24VDC
SERIAL NO.
MADE IN JAPAN