Filter
Top Products
58
Location Recorder Model PD606
Chapter 3: Names and Functions
Current drive/file number
This area shows the current drive name and the audio file number.
The following shows the examples when an audio file recorded on a DVD-RAM disk or
hard disk partition is loaded.
Protect icon
When a hard disk partition is protected, " " is shown.
You can protect or unprotect a hard disk partition via the "DISK UTILITY" menu of the
MENU mode (see page 211).
File name/Next file name
During playback or recording, this area shows the name of the current audio file.
In record pause mode, it shows the name of the next audio file to be created.
Disk remaining
When any track is record-armed, the remaining recordable time of the disk or partition
is shown.
Depending on the number of record-armed tracks, the remaining time changes.
When "Take" is selected
When "Date" is selected
When "Reel" is selected
The file name is given as the internal realtime clock data when you start
recording.
The file name is given as "<Scene name> + <Take number>". You can
specify the Scene name and the starting take number via the MENU mode.
The Take number is incremented automatically each time a file is created.
The file name is given as "<Disk (or partition) volume label> + <File num-
ber>".
A file name is automatically given and shown according to the setting of the "Default file
name" item in the "SYS SETUP" menu of the MENU mode, as follows.
(By default, the "Default file name" item is set to "Take". See page 140 for details about
the "Default file name" item.)
During playback (including while stopped)
or recording, the name of the current audio
file is shown. During recording, the remain-
ing time is also shown.
If any track is record-armed, the name of the
next audio file to be created is shown, as well
as the remaining time.
The DVD drive is selected as the current drive
and the audio file "002" is currently loaded.
Partition 1 is selected as the current drive and
the audio file "001" is currently loaded.