Fostex PD606 Network Card User Manual


 
18
Location Recorder Model PD606
Chapter 1: Main features
Provides the stereo bus output connector (XLR 5-pin). From this connector
and output channels 1 through 6, you can output eight-channel signals.
5.0(A )XAM
V42-21
NI-CD
V42-21
UO-CDT
DBYK
TSOH
CP
TUO SUB TS
BSU
A
DJUST
You can export a recorded audio file to the AVID system by creating the ALE
file.
The Mark/Cue function allows to store markers (cue points) during
recording. You can locate or skip to a cue point quickly.
The "False start" function allows to cancel recording easily.
"Pre Record" function allows glitch-free recording. When this function is
active, recent audio data is pooled in the buffer and recording starts from the
audio data in the buffer.
During recording, the audio file is automatically saved every minute in
background.
Equipped with the digital mixer which you can enjoy intuitive analog-like
operation.
Stereo bus output connector
In 24-bit/48kHz mode, you can record up to approximately 85 minutes onto
six tracks, or 64 minutes onto eight tracks.
* The times shown above are the recording times on a DVD-RAM disk (4.7GB)
or a partition (approx. 4.5GB) of the hard disk.
In 24-bit mode, you can make recording with sampling frequencies of 44.1/
48 kHz (up to 8 tracks), 88.2/96 kHz (up to 4 tracks) or 176.4/192 kHz (up to
2 tracks).
In 16-bit mode, you can make recording with sampling frequencies of 44.1/
48 kHz (up to 8 tracks).
Mixer section