Filter
Top Products
99
Location Recorder Model PD606
Chapter 5: Recording/Playback
Basic playback
Normal audio playback
The following procedure assumes that an audio file is recorded to a DVD-RAM disk or
hard disk partition.
1) Press the [SHIFT] key followed by the [FILE SEL /
DRV, PAT.] key to enter drive select
mode.
2) Use the [MENU] dial to select the desired drive and press the [ENTER/YES] key.
3) Select the desired audio file you want to play back using either of the following methods.
<Selecting a file using the
[[
[[
[
] / [] / [
] / [] / [
] / [
]]
]]
]
keys>
<Selecting a file from the FILE SEL screen>
While the unit is stopped, press the [FILE SEL/
DRV,PAT.] key to bring up the
FILE SEL screen, on which all audio files recorded to the selected drive are
listed.
Use the [MENU] dial to select the desired audio file and press the [ENTER/
YES] key.
The display shows the Home screen of the selected audio file.
LIGHT EXIT
MONO
ST
SOLO
C2
C3
C4
MS
FILE SELTIME
QUICK SET
PHONES
MONITOR
MAXMIN
4
3
2
1
5
6
L
R
ON
OFF
POWER
DVDHDD
ACCESS
PD606 LOCATION RECORDER
SHIFT
CONTRAST
MENU
DR V, PAT.
TC SET
ENTER / YES
BATT
1 / 3 / 5 + 2 / 4 / 6
ST BUS
READY TRK
C1
LINK MASTER
FILE SEL
DRV,PAT.
LOCATE
CIRCLE TAKECUE
OFF
SLATEJAM
MIC
TONE
PRE REC
OFF
ON
symbol
0
9
WXYZ
MNO
6
DEF
3
CLEAR
FILE
FALSE START
CUE
NEXTPREV
RECPAUSE
FILE
CUE
NEXTPREV
See "Skip/locate functions" on page 100 for details.
By pressing the [ ] or [ ] keys
while the unit is stopped, you can
skip backward or forward to the
beginning of the previous or next
audio file.