Filter
Top Products
189
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Using the "Sel. TC Out" menu item, you can set the time code source (Repro or Gen) fed from
the [TIME CODE OUT] connector.
<Note>:
Even if "Sel. TC Out" is set to "Gen", the generator time code is not output
when the generator mode is set to the "EXT RUN" mode.
Outputs the internal generator time code.
Outputs playback time code.
Time code output source selection [Sel. TC Out]
2) Use the [MENU] dial to select the “Sel. TC Out” menu item, and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
1) When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/
TC SET] key.
The display now shows the TC SETUP menu screen.
3) Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting.
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing
Repro
Gen
You can select from among “Repro” and “Gen” (the default is “Repro”).
Options