Filter
Top Products
151
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm
your setting.
• End pop tone setting
Use the [MENU] dial to select the “End pop tone” and press the [ENTER/YES] key.
The current setting starts flashing.
The 1kHz pop tone is recorded at the end of recording.
Off
The 1kHz pop tone is not recorded at the end of recording.
On
Selectable between “On” and “Off” (the default is “Off”).
Options
No slate or pop tone is recorded.
TONE
4 POP TONE
The slate tone at 1kHz is recorded for the duration set by “Tone rec time”.
The pop tone at 1kHz is recorded. The cycle of 0.5 sec tone and 0.5 sec mute recording
is made four times repeatedly.
Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm
your setting.
Selectable between “Off”, “TONE” and “4POP TONE” (the default is “Off”).
Options
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing
Off