Filter
Top Products
47
Location Recorder Model PD606
Chapter 3: Names and Functions
9. [ACCESS] indicator (HDD, DVD)
Each indicator Indicates the access condition of the internal hard disk
drive or the DVD-RAM drive.
Each indicator lights in green while the corresponding drive is not
accessed, in orange while it is accessed for reading, and in red while it is
accessed for writing.
* When no disk is set to the DVD-RAM drive, the "DVD" indicator is unlit.
8. [MENU]/[LINK MASTER] dial / [ENTER/YES] key
You can rotate or press this knob. This knob has three main functions.
• [MENU] dial function:
In the MENU or editing mode, rotating this knob selects an item, option,
alphanumeric character, etc.
• [LINK MASTER] dial function:
Rotating this knob controls the master gain of linked channels.
• [ENTER/YES] key function.
When unSHIFTed, pressing this knob confirms the setting or executes a
function. When SHIFTed, pressing this knob brings up the main menu
screen.
MENU
ENTER/YES
LINK MASTER
DVDHDD
ACCESS
10. Alphanumeric keys
While the display shows the Home screen, pressing any of the
alphanumeric keys enters the time data edit mode. After editing time
data, you can locate to the edited time position by pressing the [LOCATE]
key (see page 103). While the unit is in any of the edit modes, you can
enter time data or name.
<Key example>: Using the "3" key, you can enter "d", "e", "f", "D", "E" and
"F", as well as "3".
symbol
09
WXYZ
8
TUV
7
PQRS
GHI
4
JKL
5
MNO
6
space
1
ABC
2
DEF
3
12. [CLEAR] key
Pressing this key functions in the following manners.
• While entering characters:
Erases the next character on the right of the cursor position.
• While editing time data:
Clears time data and sets it to “00h 00m 00f 00sf”.
• While the "Peak hold" setting menu in the Setup mode is set to "∞":
Resets the peak level indication on the level meters.
• While a warning popup window is shown:
Dismisses the popup window.
11. [LOCATE] key
Locates to the desired position in the following manners.
• While a cue point is selected, pressing the key locates to the selected
cue point (see page 104).
• While time data is being edited, pressing the key locates to the edited
time position (see page 103).
• While the display shows the Home screen, pressing the key locates to
the point previously located to (the default setting is "ABS 0")(see page
102).
LOCATE
CLEAR
<Note>:
In this manual, we describe this knob as the [MENU] dial,
[LINK MASTER] dial or [ENTER/YES] key, depending on the func-
tion used.