Filter
Top Products
159
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
Limiter parameter setting [Limiter parameter]
• Grouping setting
Use the [MENU] dial to select the “Grouping” and press the [ENTER/YES] key.
The current setting starts flashing.
Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm
your setting.
• Threshold level setting
Use the [MENU] dial to select the “Threshold” and press the [ENTER/YES] key.
The current setting starts flashing.
Selectable between “Mono” and “1-6” (the default is “Mono”).
Options
3) Use the [MENU] dial to select the “Limiter parameter” menu item and press the [ENTER/YES] key.
You can set “Grouping”, “Threshold” and “Ratio” parameters.
1) While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2) While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
The “Limiter parameter” menu item makes parameter setting for the limiter.
*The limiter for the stereo buss is always L-R linked.
Flashing
Flashing
1-6
Mono
The limiter for each channel works independently.
Channels 1 through 6 are grouped, and limiters for channels 1 through 6 work the same
according to the input levels of channels 1 through 6.