Filter
Top Products
88
Location Recorder Model PD606
Chapter 5: Recording/Playback
Starting recording
The following procedure assumes that all the necessary preparations for recording such as
signal source connection, drive selection, level settings, etc. have been completed.
1) Press the [READY] key to arm the desired track for recording.
The [READY] indicator for the armed track starts flashing in red.
If you attempt to start recording when no track is armed, "Select ready!" is shown.
2) Slide the [REC] key.
The PD606 automatically creates a new audio file and starts recording to it.
The file name given to the created audio file depends on the setting of the "Default file
name" item in the "SYS SETUP" menu of the MENU mode.
3) To stop recording, press the [PAUSE] key.
During recording, only the [PAUSE] key is effective. To stop the recorder completely, press
the [STOP] key after pressing the [PAUSE] key.
Note that the recorder automatically stops completely after a certain period of time since
it enters the pause mode. This period is set to three minutes by default, but can be changed
to a desired period between 0.1 and 9.9 minutes in 0.1 minute steps or infinity using the
"Pause time" menu in the "SYS SETUP" menu of the MENU mode (see page 152).
If you press the [LOCATE] (or [STOP] + [REW]) key after stopping recording, the recorder
locates to the beginning of the newly created audio file. Therefore, you can check the
recorded sound by pressing the [PLAY] key in this condition.
<Note>:
Every time you start recording after you stop recording, a new audio file is
created and recording is made from the beginning of the new file.
[REC] key[PAUSE] key
<Note>:
You can always record analog input signals regardless of the record source
setting if each channel receives only an analog signal. When a channel whose record
source is set to "Digital" receives both digital and analog signals and it locks to the
digital signal, the digital signal takes priority (the analog signal of this channel is not
recorded). The record source can be set using the "Rec source set" item in the "SYS
SETUP" menu of the MENU mode. See page 146 for details.
LOCATE
CIRCLE TAKECUE
OFF
SLATEJAM
MIC
TONE
PRE REC
OFF
ON
symbol
09
WXYZ
8
TUV
7
PQRS
GHI
4
JKL
5
MNO
6
space
1
ABC
2
DEF
3
CLEAR
E
XIT
DVD
S
R
FILE
MENU
FALSE START
CUE
NEXTPREV
ENTER / YES
B
ATT
RECPAUSE
LINK MASTER
Recording analog audio