Filter
Top Products
95
www.gateway.com
Replacing the CMOS battery
If the server clock does not keep time or the settings in the BIOS Setup utility are not saved
when you turn off the server, replace the CMOS battery with an equivalent battery.
To replace the battery:
1 Print the appendix for BIOS Settings in this guide.
2 Restart your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
3 Record the BIOS settings on your printout, then close the utility.
4 Turn off your server, then follow the instructions in “Preventing static electricity
discharge” on page 41.
5 Follow the instructions in “Opening the server case” on page 42.
6 Remove the PCI riser assembly by following the instructions in “Removing and
installing the PCI riser assembly” on page 69.
Warning Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of or recycle used batteries by taking them to a hazardous
waste facility. Follow all local regulations for correct battery disposal.
8510522.book Page 95 Wednesday, March 16, 2005 11:19 AM