Filter
Top Products
112
www.gateway.com
5 Insert a bootable USB “disk-on-key” containing a valid BIOS image into a USB port.
6 Reconnect the power cords and turn on the server. The BIOS recovery is initiated.
While the BIOS is being recovered, the monitor displays a blue screen and the server
will beep continually. The process is complete when the server stops beeping.
7 Remove the bootable USB “disk-on-key.”
8 Turn off the server, then disconnect the power cords and all other cables connected
to the server.
9 Follow the instructions in “Opening the server case” on page 42.
10 Place the jumper back onto pins B1-B2.
11 Follow the instructions in “Closing the server case” on page 44.
12 Plug in the AC power cords and turn on the server, then verify that the recovery was
successful.
8510522.book Page 112 Wednesday, March 16, 2005 11:19 AM