Filter
Top Products
84
www.gateway.com
8 If you are installing a second processor in your server, follow the instructions in
“Removing the processor air dam” on page 46 to remove the processor air dam in
the processor air duct.
9 Before inserting the processor into the socket, make sure that:
■ The processor release lever is open all the way (135° from the closed position)
■ The triangular arrow on the corner of the processor aligns with the triangular icon
on the corner of the processor socket
10 Install the new processor into the processor socket, then press the processor locking
lever down until it lays flat against the processor socket.
Caution If you add a second processor to your server, you must remove the
processor air dam or the processor may overheat, causing possible
data loss and damage to the processor.
8510522.book Page 84 Wednesday, March 16, 2005 11:19 AM