Filter
Top Products
73
www.gateway.com
8 Line up the screws on the riser assembly with the slot and large hole in the
replacement PCI riser connector.
9 Press and hold the blue riser locking lever, then place the PCI riser connector onto
the retention pins.
10 Slide the PCI riser connector toward the right to lock it into place, then release the
blue lever.
11 Follow the instructions in “Removing and installing a PCI expansion card” on page 73.
12 Replace the PCI riser assembly by following the instructions in “Removing and
installing the PCI riser assembly” on page 69.
13 Follow the instructions in “Closing the server case” on page 44.
14 See the card’s documentation for software installation instructions.
Removing and installing a PCI expansion card
To remove and install a PCI expansion card:
1 Follow the instructions in “Preventing static electricity discharge” on page 41. Make
sure that you turn off the server, then unplug the power cord(s) and all other cables
connected to the server.
2 Follow the instructions in “Opening the server case” on page 42.
3 Disconnect any cables that are attached to the card you are removing.
8510522.book Page 73 Wednesday, March 16, 2005 11:19 AM