Filter
Top Products
24
www.gateway.com
Setting up the operating system
If you ordered your server with the operating system already installed by Gateway, in most
cases it is completely installed and the basic settings are already configured. The Windows
Small Business Server operating system may require additional installation, depending on
the version you ordered. See your operating system’s documentation for instructions on
completing the installation or configuring advanced settings for your specific network.
If you are installing an operating system because it was not already installed by Gateway,
see the appropriate installation guide for instructions.
Initial hardware settings
Your server comes from the manufacturer with the correct initial hardware settings to
operate your server as configured. However, at some point you might want to change
settings to reflect a tasking change, a change in security requirements, or the addition of
new resources to your server.
General hardware settings, as well as enabling or disabling the onboard LSI RAID solution,
can be changed by using the BIOS Setup utility. The RAID solution can be configured by
using the RAID BIOS console (or the specific RAID console which accompanied a
customized, add-in RAID solution).
For information on the BIOS Setup utility, see “Using the BIOS Setup Utility” on page 107.
For information on BIOS settings, see “BIOS Settings” on page 149. For information on
the RAID BIOS console utility, see “Configuring your onboard RAID solutions” on page 62.
For information on a specific RAID console for an add-in RAID solution, see the
documentation on that hardware which came with your server.
8510522.book Page 24 Wednesday, March 16, 2005 11:19 AM