Filter
Top Products
105
www.gateway.com
12 Insert the new system board into the case, then slide the board toward the back of
the case so the board is held under the system board guides.
13 Replace the seven system board screws you removed in Step 9.
14 Follow the instructions in “Installing memory” on page 66.
15 Follow the instructions in “Installing a processor” on page 82.
16 Follow the instructions in “Replacing fans and fan modules” on page 76.
17 Reinstall the PCI riser assembly by following the instructions in “Removing and
installing the PCI riser assembly” on page 69.
18 Follow the instructions in “Closing the server case” on page 44.
19 Turn on your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
8510522.book Page 105 Wednesday, March 16, 2005 11:19 AM